VFS Pneumatic Dust Butterfly Valve V2FS

VFS Pneumatic Dust Butterfly Valve V2FS pneumatic dust butterfly valve is mainly composed of two aluminum alloy half valve body, the valve plate is made of wear-resistant polymer material, the sealing ring is made of wear-resistant rubber, has good sealing effect, wear-resistant, long life and other characteristics. The utility model can be used for various low pressure working conditions containing granular, dust and powder medium, such as the lower part of a switch material box, a hopper and a simple storehouse, a screw or other type conveyor containing powder or granular materials. Pneumatic Dust Butterfly Valve can also be used in the dust removal pipeline, suitable for air, dust-containing gas, flue gas and other media with pressure of 0.1 MPA and temperature below 80 °C

Pneumatic Dust Butterfly valves are available in single and double flanges, single flanges with top flanges and flanged components for flexible sleeve connections, double flanged valves, top and bottom identical Farlane, gravity cast body, higher Strength Than die-cast body, rotary valve plate using polymer materials, wear-resistant, and less components, lightweight, easy handling.

Pneumatic dust structure is simple, small size, short structure length, small volume, light weight, suitable for large diameter valves. Under low pressure, a good seal can be achieved. Because the two sides of the rotating shaft disc by the media basically equal, and the direction of the Torque is opposite, so the opening and closing is more labor-saving. Pneumatic dust structure is simple, small size, short structure length, small volume, light weight, suitable for large diameter valves. Under low pressure, a good seal can be achieved. Because the two sides of the rotating shaft disc by the media basically equal, and the direction of the Torque is opposite, so the opening and closing is more labor-saving.